Chase Chillers QBE 004-E - 6,960 BTU/hour

This chiller from Chase Chillers is a member of the QBE series which has cooling capacity between 0.6 and 4.8 tons. The non-ferrous refrigeration circuit can cool well-below wet bulb temperature. It is fitted with a parametric electronic controller that can give you real time statuses of the chiller. Glycol concentrations up to 50% can be tolerated. The vertical air flow through this chiller vents air flow easily into the room. The cabinet frame and panels are powder-coated steel, and the condenser is electro-coated for protection from corrosive wear and tear. Maintenance is a breeze with the removable side panels that come equipped with a hanging system.

The QBE series from Chase Chillers is perfect for your brewing operations. For brewery options, this chiller can be ordered with a P5 pump with pressures up to around 70 PSIG. An outdoor installation setting and plate heat exchanger evaporator is available on the 002-007 single phase models, and outdoor installation packages are standard on three phase models so you are not taking up precious space in your brewing space. Stainless steel tanks with water flow bypass valves are available to keep your operation in perfect shape.

See the technical specifications below for more information.

  • 230V/1Ph/60Hz
  • 0.58 tons of Cooling Capacity
  • 6,960 BTU/hour
  • 1.5 gal/min Fluid Flow Rate
  • 52 PSIG P3 Pump Pressure
  • 69 PSIG P5 Pump Pressure
  • R407C refrigerant
  • Rotary Compressor Type
  • Coaxial Evaporator Type
  • Microchannel Condenser Type
  • IP40 Indoor Electrical Enclosure Rating (IP44 Outdoor)
  • 46 dbA Sound Pressure Level
  • 6.6 G tank capacity
  • 0.5” NPT(F) Fluid Connection
  • 28.3” x 26.4” x 26.8” (W x D x H)
  • 194 lb empty, 249 lb full